I-Series Power Requirements

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 12265 


The I3H252 Hardware Installation Guide states, in the 'Power Requirements' section, Table A-8:
   Electrical                   Specification
Input Power 24 VDC ~ 2.5 A
Power Consumption 18 to 36 Volt DC
0.93 to 1.87 A
33.48 to 33.66 W
Expanding on that information:
  • The I3H252 switch has a maximum rated input of 2.5A.
  • Its I3H-PWR power supply has a rated output of 2.5A.
  • The over-current protection for the I3H-PWR external supply circuit must be rated at a maximum of 2.0A.
  • The maximum current drawn by the I3H252 during safety approval was 1.38A.

See also: 10166.
Photo of FAQ User

FAQ User, Official Rep

  • 13,620 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.