I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands

  • 0
  • 1
  • Question
  • Updated 4 years ago
  • Answered
I'm new to Extreme, how do you show unused ports on each module/stack. I have tried many of the "show ports commands, but it's not want I'm looking for, thank you.
Photo of Johnny Rogers

Johnny Rogers

  • 70 Points

Posted 4 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 51,286 Points 50k badge 2x thumb
What switch platform/model do you have ?

What are you looking exactly... port down status or ports with only the default VLAN on it or ports with no decription....
Photo of Jason Parker

Jason Parker, Employee

  • 3,038 Points 3k badge 2x thumb
The Link state row shows you the state (see guideline at the bottom for a breakdown

* X460-24.1 # show ports statistics no-refresh
Port      Link     Tx Pkt       Tx Byte       Rx Pkt       Rx Byte Rx Pkt Rx Pkt
          State    Count        Count         Count        Count    Bcast  Mcast
================================================================================
1         A      63612649  85016650428     40431217   7274045343  1898181   636555
2         R            20         2306            4          714        0        4
3         R          3547      1034377         1436       379105      944        0
4         R          3541      1029624         1443       384535      951        0
5         R             0            0            0            0        0        0
6         R             0            0            0            0        0        0
7         R          4379      1152933         2497       519504     1138        0
8         R             0            0            0            0        0        0
9         A       1416271    120773687        13767      1503374     9255     4512
10        A       1415728    120514789        15268      1895612    10264     4512
11        A       1413066    119555991        13773      1687525     9259     4514
12        A       2353831    199350424        30050      2920062    20171     9879
13        A       1484261    125256509        14408      1574619     9673     4735
14        A       1492258    126027813        14570      1582396     9793     4777
15        A       1510889    127353849        14785      1600554     9937     4848
16        A       1519407    128170224        14999      1635819    10058     4941
17        A      37851097   7245648567     61468104  82055174671      105    16702
18        R       1655459    336585552      2448148   3370640784        2      973
19        R             0            0            0            0        0        0
20        R             0            0            0            0        0        0
================================================================================
          > indicates Port Display Name truncated past 8 characters
          Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback
* X460-24.2 #

Jason
Photo of John Rogers

John Rogers

  • 120 Points 100 badge 2x thumb

Thank you !

Photo of John Rogers

John Rogers

  • 120 Points 100 badge 2x thumb

Is there a command to use to clear statistics (counters)? When I use the show port statistics no-refresh, it show tx/rx etc. Some of the ports that shows the tx/rx packet count, do not have a amber/green link on the switch port LED. So it would seem that nothing is plugged in/turned on those ports.I ;think the stats were from before, the floor is  mostly un-occupied now.

Photo of Drew C.

Drew C., Community Manager

  • 40,684 Points 20k badge 2x thumb
Hi John,
Just press 0 and the counters will reset.
You can clear all counters in the switch with the command:  clear counters.