Increase the SNMP poll interval timeout

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Hello, I have Extreme OneView running on the main site.
From there, I have an unstable vpn to a remote site.
Because of this, I receive a lot of SNMP alarms of the switches on the remote site.

How can I increase the SNMP poll timeout value?
For example, I would like that I get an alarm, if SNMP polling fails 10 times in a row the last 2 minutes.

Many thanks and best regards,
Yves
Photo of Yves Haslimann

Yves Haslimann

  • 898 Points 500 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Tooley, Akiko

Tooley, Akiko, Employee

  • 610 Points 500 badge 2x thumb
These are the steps below to increase the SNMP poll timeout values:

1.  Start NetSight Console
2.  Click Tools > Options > Suite Options > Status Poling
3.  Increase both SNMP Retries and Timeouts
Photo of Yves Haslimann

Yves Haslimann

  • 898 Points 500 badge 2x thumb
Hello,

SNMP settings are in. Click Tools > Options > Suite Options > Advanced SNMP Settings.
The one you told me are ICMP setting. But thank you anyway :-)

One more. Can I configure them specific by device?