cancel
Showing results for 
Search instead for 
Did you mean: 

Increase the SNMP poll interval timeout

Increase the SNMP poll interval timeout

Yves_Haslimann
New Contributor III
Hello, I have Extreme OneView running on the main site.
From there, I have an unstable vpn to a remote site.
Because of this, I receive a lot of SNMP alarms of the switches on the remote site.

How can I increase the SNMP poll timeout value?
For example, I would like that I get an alarm, if SNMP polling fails 10 times in a row the last 2 minutes.

Many thanks and best regards,
Yves
2 REPLIES 2

Yves_Haslimann
New Contributor III
Hello,

SNMP settings are in. Click Tools > Options > Suite Options > Advanced SNMP Settings.
The one you told me are ICMP setting. But thank you anyway 🙂

One more. Can I configure them specific by device?

Tooley__Akiko
Extreme Employee
These are the steps below to increase the SNMP poll timeout values:

1. Start NetSight Console
2. Click Tools > Options > Suite Options > Status Poling
3. Increase both SNMP Retries and Timeouts

GTM-P2G8KFN