cancel
Showing results for 
Search instead for 
Did you mean: 

Installing a BD 8800 G48Tc module on a BD8810

Installing a BD 8800 G48Tc module on a BD8810

Gabriel_Poza
New Contributor
Dear all,

just to confirm. We need to increase the capacity of a live BD8810 with a new BD 8800 G48Tc module. This task is a cold one iwth no service impact right? i mean, there's no need to perform any cli action on the switch to activate the new card expect for the show slot verification one ¿?

Thanks in advance

6 REPLIES 6

Gabriel_Poza
New Contributor
Thanks for it

Tooley__Akiko
Extreme Employee
G48Tc is compatible with MSM-48c.These cards will run on the BlackDiamond 8800 as long as the EXOS version is supported on the card and each card is running the same EXOS version.
You can refer to the GTAC article: Which version of EXOS is supported on my hardware?
https://gtacknowledge.extremenetworks.com/articles/Q_A/Which-version-of-EXOS-code-is-supported-on-my...
Component support section will show you the minimum and last supported EXOS software version.

Gabriel_Poza
New Contributor
Thansk for the feedback.

release is: 12.6.2.10

no 8900 cards i believe. MSM-48c

EtherMAN
Contributor III
Very import bit of info... you also need to check what type of cards you are running and if you are running 8900 cards and 128 MSM's adding a C card well affect performance for the whole switch. It will be lowered to the C card specs...
GTM-P2G8KFN