Integrating HP-Aruba WLAN controller in Extreme Control?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)
Is it possible to integrate a HP-Aruba WLAN controller in Extreme Control and NAC?
Photo of Roland Zirn

Roland Zirn

  • 100 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 45,306 Points 20k badge 2x thumb
Photo of Steve Ballantyne

Steve Ballantyne

  • 5,566 Points 5k badge 2x thumb
I would say you can throw about anything using SNMP into Extreme NMS/Netsight and have some visibility and control. It's not likely you will be able to do all the day to day management functions. It would be more for monitoring purposes. Is that what you were after? Or did you want to *manage* the controller?
Photo of Yacobucci, Ryan

Yacobucci, Ryan, Multi-Tier Technical Support Engineer

  • 4,796 Points 4k badge 2x thumb

Generally as long as the vendor follows standard RFC specifications we can integrate it into Extreme Control. Usually all vendors I've seen support at least RFC 3580 VLAN authorization. 

Two articles you may want to keep in hand if you are integrating are the following:

Extreme Control may not have the sysObjectID to determine RFC 3576 configurations, and you may need to configure custom attributes to be sent. As long as the attribute exists in the freeRADIUS dictionary it's configurable in Extreme Control.

Photo of Roland Zirn

Roland Zirn

  • 100 Points 100 badge 2x thumb
Hello guys,

Thanks for yours helpful informations!

Have a nice day
Photo of Ryan Mathews

Ryan Mathews, Alum

  • 8,988 Points 5k badge 2x thumb
Thanks for joining the Hub Community Roland.   Great to have you on board.