Interface History Cisco

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Doesn't Need an Answer
  • (Edited)
I have two Cisco routers added into my instance of Extreme Management. Both of them are responding to SNMP. I've enabled "Collect Device Statistics" on the device and "Collect Interface Statistics" on interfaces on each. RTR2's interface is collecting statistics, RTR1's interface is not reporting any statistical data collection.

Both devices are configured identically, and both respond to SNMP and communicate with my Extreme Management server. What should I check/change to get RTR1's interface to report it's statistics?

Edit:

The other interface I'm monitoring on RTR1 (g0/0/2) is reporting statistics. G0/0/0 is showing activity on the router:

GDC_EXT_RTR#sh int g0/0/0

...

5 minute input rate 20895000 bits/sec, 2716 packets/sec
5 minute output rate 7776000 bits/sec, 2913 packets/sec

...
Photo of Terren Crider

Terren Crider

  • 1,564 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Terren Crider

Terren Crider

  • 1,564 Points 1k badge 2x thumb
Update:

The Interface Details for the port display information:

Total (Delta) Bytes Current (%) Average (%) Peak (%)
In: 786,033,544 (75553407) 2.40 MB/s (2.015 %) 2.40 MB/s (2.015 %) 2.40 MB/s (2.015 %)
Out: 2,832,149,128 (10853303) 353.29 KB/s (0.2894 %) 353.29 KB/s (0.2894 %) 353.29 KB/s (0.2894 %)
Total: 3,618,182,672 (86406710) 2.74 MB/s (2.304 %) 2.74 MB/s (2.304 %) 2.74 MB/s (2.304 %)

Valid Packets: In Unicast 3,403,615,986 (66678) Out Unicast 2,442,647,736 (55052) In Non-Unicast N/A (0) Out Non-Unicast N/A (0)
Invalid Packets: In Errors 14 (0) Out Errors 0 (0) In Discards 0 (0) Out Discards 0 (0) In Unknown Protocol 1498271 (3)

Still no historical data, though...
Photo of Brian Townsend

Brian Townsend, Employee

  • 486 Points 250 badge 2x thumb
Hello - A GTAC case was opened to track this concern but no additional information could be gathered. We will archive this topic until more information becomes available.

BrianĀ