This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Is there a guide for configuring WiNG's onboard RADIUS server?

Is there a guide for configuring WiNG's onboard RADIUS server?

Phil_storey
Contributor

‎10-10-2017 05:38 AM

Hi Do you have a guide to getting the onboard Radius server working in V5.8.5 when using DOT1X and MSCHAPV2, I have set this up and it all looks to be working but the radius times out, shows its running but I don't think it is ( this is on the RFS7000 using a mixture of 7131 and 7532 AP's ) Note: This conversation was created from a reply on: 2017-10-09: New GTAC Knowledge Articles October 01 - 07, 2017.
0 Kudos
2 REPLIES 2

Timo1
New Contributor II

‎10-13-2017 09:28 AM

If you use EAP-MSCHAPv2, use a certificate from your PKI, if you have a PKI. If not you need to distribute the self sign cert.

Do not disable the certificate check at your clients!
0 Kudos

Wei_Pin_Lim
Extreme Employee

‎10-10-2017 08:29 PM

Hi Phil, the two links below will help on your question.
How to configure 802.1x authentication with internal RADIUS on a WiNG controller -
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-802-1x-authentication-wit...

How to configure a WiNG controller for 802.1x authentication with internal RADIUS, using LDAP to connect to a Windows Active Directory server -
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-a-Summit-WM3000-for-802-1...

0 Kudos
GTM-P2G8KFN