Is this possible to configure AP-3805i in standalone?

  • 0
  • 1
  • Question
  • Updated 11 months ago
  • Answered
Photo of arabinda mohanty

arabinda mohanty

  • 190 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Vellachery, Sumeesh

Vellachery, Sumeesh, Employee

  • 3,288 Points 3k badge 2x thumb
Arabinda Mohanty,

The only standalone models were the AP3630 or AP3640, all other model AP's are made to get their configurations from a wireless appliance.
Photo of Nathiya Munuswamy

Nathiya Munuswamy, Employee

  • 1,706 Points 1k badge 2x thumb
Photo of Rich Upshaw

Rich Upshaw

  • 1,140 Points 1k badge 2x thumb
Try configuring it to bridge at AP, check the box "Restart in Absense of Controller" (ap properties tab - Advanced) then pull it from the controller.  I hear this works.

Although this is not a "Thick" AP, it may accomplish what you need to do.
(Edited)
Photo of M.Nees

M.Nees, Embassador

  • 9,598 Points 5k badge 2x thumb
If you need a real standalone AP switch over to Extreme WiNG WLAN.