Issue with the 1200DC power supply in 8806 blackdiamond

[Tamil]

Hi Experts ,

We are getting the below error in one of the attached DC power supply in the 8806 chassis

MSM-B: Output current conversion not available for PSU (Part name 2350 rev 5.0) for 48 V sensor in slot 3 due to Part name not recognized. Sensor detection 47.86V, 2.0A

MSM-B: Power usage data unknown for PSU (Part name 2350 rev 5.0 input 57.50 V) in slot 3 due to Input volt not in range

-> show power detail

PowerSupply 1 information:
State : Empty

PowerSupply 2 information:
State : Powered On
PartInfo : PS 2350 1134J-01063 4300-00146
Revision : 5.0
Odometer : 920 days 8 hours 30 minutes
Temperature : 30.0 deg C
Fan 1 : 14025 RPM
Fan 2 : 6010 RPM
Input : 56.00 V DC
Output 1 : 47.22 V, 2.00 A (48V/1088W Max)

PowerSupply 3 information:
State : Powered On
PartInfo : PS 2350 1322J-01032 4300-00146
Revision : 5.0
Odometer : 30 minutes
Temperature : 26.0 deg C
Fan 1 : 12946 RPM
Fan 2 : 6233 RPM
Input : 57.00 V DC
Output 1 : 48.18 V, 2.50 A (48V/1088W Max)

PowerSupply 4 information:
State : Powered On
PartInfo : PS 2350 1216J-01039 4300-00146
Revision : 5.0
Odometer : 920 days 8 hours 30 minutes
Temperature : 30.0 deg C
Fan 1 : 14025 RPM
Fan 2 : 6233 RPM
Input : 58.50 V DC
Output 1 : 47.86 V, 2.12 A (48V/1088W Max)

PowerSupply 5 information:
State : Empty

PowerSupply 6 information:
State : Empty
Poll Interval : 60 s
Change Threshold : N/A
Change Action : N/A

We tried with different slot also , but we are getting the same error. Hence kindly suggest

[EtherMAN]

Digging back in my memory but If I recall some of the older power controller's on the 8000 chassis are not fully compatible with the newer psu's .... We ran in to something similar to this 3 or 4 years ago going from a old chassis a/c to d/c conversion.... We ended up replacing the chassis as the controllers were not serviceable (they can be removed but no real part number) Cleared things right up and in the end having a new chassis was the right choice because we now have 40 gig blades in that one and it was and original 8800 chassis that had C cards in it before the upgrade...

[Drew_C]

Hi Tamil,
The issue with the 8810 Chassis and 8900 modules only affects serial number codes 0533x-xxxxx or earlier. So yours doesn't have this problem.
That doesn't mean there isn't a potential problem with a PSU itself or the PSU Controller.

The only other potential issue I notice in your output above is that your input voltage is >55 VDC. The PSU should be supplied with -48VDC @ 50A.
Over time, voltage outside of tolerance can cause undue stress on components and lead to premature failure. I'm not saying that is the case here, but is a possibility.

In this case, I would suggest reducing supply voltage to 48V and seeing if the problem resolves itself. Beyond that, this would best be solved by GTAC.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

Thanks,
-Drew

[Tamil]

-> show version detail

Chassis : 800393-00-03 1140G-00197 Rev 3.0
Slot-1 : 800227-00-05 1052G-02397 Rev 5.0 BootROM: 1.0.4.1 IMG: 15.3.1.4
Slot-2 : 800224-00-05 1209G-00260 Rev 5.0 BootROM: 1.0.4.1 IMG: 15.3.1.4
Slot-3 :
Slot-4 :
Slot-5 : 800224-00-05 1209G-00258 Rev 5.0 BootROM: 1.0.4.1 IMG: 15.3.1.4
Slot-6 : 800228-00-05 1102G-00906 Rev 5.0 BootROM: 1.0.4.1 IMG: 15.3.1.4
MSM-A :
MSM-B : 800314-00-02 1211G-01225 Rev 2.0 BootROM: 1.0.4.5 IMG: 15.3.1.4
PSUCTRL-1 : 450306-00-03 1140G-00004 Rev 3.0 BootROM: 2.18
PSUCTRL-2 : 450306-00-03 1140G-00068 Rev 3.0 BootROM: 2.18
PSU-1 : PS 2350 4300-00146 1112J-01103 Rev 5.0
PSU-2 : PS 2350 4300-00146 1134J-01063 Rev 5.0
PSU-3 :
PSU-4 : PS 2350 4300-00146 1216J-01039 Rev 5.0
PSU-5 :
PSU-6 :

Image : ExtremeXOS version 15.3.1.4 v1531b4-patch1-30 by release-manager
on Tue Jan 21 18:43:02 EST 2014
BootROM : 1.0.4.5
Diagnostics : 1.20
@@@
-> show version images
Card Partition Installation Date Version Name Branch
------------------------------------------------------------------------------
MSM-B primary Tue May 12 00:45:12 ___ 2015 15.3.1.4 bd8800-15.3.1.4-patch1-30.xos v1531b4-patch1-30
MSM-B primary Tue May 12 00:47:01 ___ 2015 15.3.1.4 bd8800-15.3.1.4-patch1-30-ssh.xmod v1531b4-patch1-30
MSM-B secondary Tue May 12 01:44:23 ___ 2015 15.3.1.4 bd8800-15.3.1.4-patch1-30.xos v1531b4-patch1-30
MSM-B secondary Tue May 12 01:45:30 ___ 2015 15.3.1.4 bd8800-15.3.1.4-patch1-30-ssh.xmod v1531b4-patch1-30

The power supply was working fine previously without any issues , but last 20 days only we are getting the error logs.

Regards,
Tamil

[Drew_C]

We can send replacement PSU Controllers, but you're right, if there's an older 8810 chassis the "8900 Series" cards won't work.

Tamil, can you share the output of

code:

show version

? I can check to see if EtherMAN's hypothesis could apply.