K-Series logs "Received Interrupt PETRA_QDR_ECC" messages

  • 0
  • 1
  • Article
  • Updated 5 years ago
  • (Edited)
Article ID: 14274 

Products
K-series, firmware 8.02.01.0012 and lower 

Symptoms
Hardware interrupt message "Received Interrupt PETRA_QDR_ECC" appears on local console and in syslog ('show support'), but not in the debug messageLog ('show support'). 

For example:
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 1, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 2, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 3, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 4, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 5, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 6, value= 0x1#015
10.20.46.13 Dune[11.dTcmTask]Petra[1] Received Interrupt PETRA_QDR_ECC
instance 0, count 7, value= 0x1#015
Cause
The message reports a false error condition. 

Solution/Workaround
Upgrade to firmware 8.11.03.0005 or higher, which suppresses these harmless messages. 

Pre-upgrade workaround: Ignore the message(s). There is no negative impact.
Photo of FAQ User

FAQ User, Official Rep

  • 13,610 Points 10k badge 2x thumb

Posted 5 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.