LACP between Extreme X670 and Cisco 6509. how?

  • 0
  • 2
  • Question
  • Updated 4 years ago
friends  I am already using the Extreme X670 cascaded with cisco 6509 perfect  But now I want to make a LACP between the two and I can not  Does anyone have any example of a simple configuration of the two sides?  grateful Almir
Photo of Almir

Almir

  • 80 Points 75 badge 2x thumb

Posted 4 years ago

  • 0
  • 2
Photo of Ian Worms

Ian Worms

  • 422 Points 250 badge 2x thumb
Hi,

I hope the below helps,

!

interface GigabitEthernetx/x

 switchport

 switchport trunk encapsulation dot1q

 switchport mode trunk

 mtu 9216

 no ip address

 spanning-tree cost 10

 channel-protocol lacp

 channel-group 10 mode active

!

interface GigabitEthernetX/Y

  switchport

 switchport trunk encapsulation dot1q

 switchport mode trunk

 mtu 9216

 no ip address

 spanning-tree cost 10

 channel-protocol lacp

 channel-group 10 mode active

!

interface Port-channel10

 description LAG to Extreme 670

 switchport

 switchport trunk encapsulation dot1q

 switchport mode trunk

 mtu 9216

 no ip address

 load-interval 30

 spanning-tree cost 10

=========================

Extreme  Port 1 and 2

=========================

enable sharing 1 grouping 1,2 algorithm address-based L2 lacp

======================================================


Thanks
Ian