LACP active/backup

  • 0
  • 1
  • Question
  • Updated 4 years ago
Create Date: May 14 2013 11:22AM

Hello.

I have a Summit X350-48T on my DC and i need to configure the LACP on mode active/backup.
Iam working 2 weeks on it and dont works, it are always balancing trought the pri/sec ports.

I need the flow just on primary and the secondary is a redundat link, secundary must be used only if primary lost LACP communication.
All connections bellow are Layer 2, i need to redundant the connection on summit 1 trought 2 others switches.
The cenario dont permit use of "configure port XX redundant XX link off".So, really need to be via LACP.

                                                    --------------------------------
                                --------------- |  CISCO 7018 with lacp  |-----------------
                               | bkp             --------------------------------                      |
----------------------------                                                                                 \
| Summit X350-48T  1 |                                                                                 >> NETWORK CLOUD
----------------------------                                                                                  /
                         eth | active           ---------------------------                            |
                               ------------------|Summit X350-48T  2 |----------------------
                                                      ---------------------------


Thanks in advanced.

(from Pedro Azzi)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 4 years ago

  • 0
  • 1

There are no replies.

This conversation is no longer open for comments or replies.