LAG in MLAG with LACP

  • 0
  • 1
  • Question
  • Updated 5 years ago
  • Answered
Create Date: Jul 25 2013 11:06PM

Hello,

I'm not sure about below config, in this moment i don't have switches to test this scenario so i'd like ask about check this config:2 core switches: summit670 (15.3) connected each other 4x10G ports: 45-481 switch edge: BD8810 (12.5) connected to each summit 2x10G ports 1-2 to summit1, ports 3-4 to summit2

conf:
summit1:

create vlan "isc"configure vlan isc tag 3000
configure vlan isc add ports 45 tagged
enable sharing 45 grouping 45-48 algorithm address-based L3_L4 lacp
enable sharing 1 grouping 1-2 algorithm address-based L3_L4 lacp
create mlag peer "mlag-to-summit2"
configure mlag peer "mlag-to-summit2" ipaddress 1.1.1.2 vr VR-Default
enable mlag port 1 peer "mlag-to-summit2" id 1

conf summit2:
create vlan "isc"
configure vlan isc tag 3000
configure vlan isc add ports 45 tagged
enable sharing 45 grouping 45-48 algorithm address-based L3_L4 lacp
enable sharing 3 grouping 3-4 algorithm address-based L3_L4 lacp
create mlag peer "mlag-to-summit2"
configure mlag peer "mlag-to-summit1" ipaddress 1.1.1.1 vr VR-Default
enable mlag port 3 peer "mlag-to-summit2" id 3

bd:
enable sharing 1:1 grouping 1:1-4 algorithm address-based L3_L4 lacp

Is this config correct ?

thanks for help
regards,
Peter

(from peter_peter)
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb

Posted 5 years ago

  • 0
  • 1
Photo of EtherNation User

EtherNation User, Employee

  • 20,340 Points 20k badge 2x thumb
Create Date: Aug 1 2013 10:12AM

Please next time try to cut properly config, I can't read that.MLAG and LAG (LACP) will work but there is one case with this configuration ( If You'll loses link for more then few minutes, it will not back to LAG group). So it's not supportet, use static LAG that works well.

(from karpiu)

This conversation is no longer open for comments or replies.