cancel
Showing results for 
Search instead for 
Did you mean: 

learned mac address refer to group

learned mac address refer to group

Visconti
New Contributor III
I have created a DEVICE GROUP with ITS INTERNAL only two port/pc so I STARTED the flexview "learned mac addresses" to know if the 2 pc are turned on but my view show nothing.

8eafa1cfc85543a4ba233c5279985b72_RackMultipart20180925-34248-t4e7ay-Screenshot_2018-09-25-10-57-34_inline.jpg


8 REPLIES 8

Visconti
New Contributor III
YES ! but I need to show only the computers in that group
otherwise what is the purpose of creating groups?

Visconti
New Contributor III
I'm afraid so 😞

I get the same result..... I'd open a GTAC ticket as I'm not sure whether that will work with this flexview.

Visconti
New Contributor III
Sorry  I am calm with you ..... I am less calm with Netsight !!
GTM-P2G8KFN