cancel
Showing results for 
Search instead for 
Did you mean: 

List of port device X series

List of port device X series

Visconti
New Contributor III
Do anyone say me why in netsight I show the list of the port of my switch (X series) in this way 1,2,1000 1002, 1003 ecc ....?
Instead the list of port of the switch B5 series is ge 1.1, ge 1.2 ecc.....

ef4a263f4202422c984abbec7b1ef81f_RackMultipart20180926-54458-1yp8hi5-20180926_125939_inline.jpg


2 REPLIES 2

Visconti
New Contributor III
OK thanks ...I learned a new thing with MIB tool...Finally I Knew what is MIB tools...

But the problem I'm talking about the view prepacked inside the NetSight that it is not editable

Ronald_Dvorak
Honored Contributor
That is the output of the MIB OID for interface index.

The interface index is not only used for ports but also for VLANs, mgmt port, virtual router,...

That is the reason it's just a number and not e.g. ge.1.1

e21cdfde71a347b1a05bca25bbbd2802_RackMultipart20180926-55360-17zf23a-XMC_MIB_interface_index02_inline.png



You'd use the OID ifName=1.3.6.1.2.1.31.1.1.1.1 instead which gives you the e.g. 1:1 instead.

e21cdfde71a347b1a05bca25bbbd2802_RackMultipart20180926-42371-20i4ss-XMC_MIB_interface_index03_inline.png


GTM-P2G8KFN