LLDP stacked switches SecureStack C3G124-24P

  • 0
  • 1
  • Problem
  • Updated 3 years ago
  • Solved
I have stacked two C3G124-24P Switches and also have configured LLDP for all Ports ge.1.1-22, ge.2.1-22. I used a windows tool to test it, I got all infos (Switch name, Modell, IP, Port, VLAN, speed...) when I ́m connected to the stacking master but when I ́m connected to a stacking member I get only some infos (MAC Address, Port, speed).
Where is my fault, what has to be configured to get all infos from the stack member too?

C3G124-24P
FW 06.61.05.0009
Photo of PeterM

PeterM

  • 132 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Andre K.

Andre K.

  • 356 Points 250 badge 2x thumb

Have you tried "set lldp port tx-tlv all ge.*.1-22"?


Photo of PeterM

PeterM

  • 132 Points 100 badge 2x thumb
Worked perfect. Thank you
Photo of Alex Morrissey

Alex Morrissey, Employee

  • 862 Points 500 badge 2x thumb
Hello Peter,

We have created the below article to help with configuring ports on the stack members of a stack.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-Ports-on-Stack-Members

- Alex