Load MIBS and TRAPS over NetSight differents Brands

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Solved
  • (Edited)
I need to load the MIBs and traps of different brands , what is the procedure for loading in NetSight and to have all the information the device?
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Photo of Tony Thornton

Tony Thornton, Extreme Alumnus

  • 1,412 Points 1k badge 2x thumb
Hi Jairo,

Below is a link to a knowledgebase article that shows how to import MIBs into NetSight.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-Importing-a-MIB-into-Netsight

Hope this helps.
Tony
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
THKS
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
And download the MIBs and the load on the server of NetSight but as I do for loading or asosiarlas the device?
There are some technical guidance as asosiar the MIB with devices of different brands in NetSight ?
(Edited)
Photo of Tony Thornton

Tony Thornton, Extreme Alumnus

  • 1,412 Points 1k badge 2x thumb
You should not need to associate a MIB with a particular device.  Have you tested that the MIB is correctly loaded by entering an OID in the "Find what" field?

  • In the 'Find What' field about half way down on the left enter a MIB Object from the MIB that you were trying to import. Click on Find. This will confirm the MIB was imported properly, if you are taken to that location in the MIB Tree then the MIB was imported successfully.