logging in enterasys C3G124-24

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I have an enterasys C3G124-24 with firmware.
I enabled the console logging and file storage with the command "set logging local console enable file enable".
I have configured logging for applications:
SW-CORE(su)->show logging application

        Application   Current Severity Level  Server List
 89      CLIWEB                   6             1-8, console, file
 90      SNMP                     8             1-8, console, file
 91      STP                      8             1-8, console, file
 92      Driver                   8             1-8, console, file
 93      System                   8             1-8, console, file
 94      Stacking                 8             1-8, console, file
 112     UPN                      8             1-8, console, file
 118     Router                   8             1-8, console, file
 120     Security                 6             1-8, console, file

1(emergencies)  2(alerts)       3(critical)
4(errors)       5(warnings)     6(notifications)
7(information)  8(debugging)
¿Which is the file that is generated by the logging?.¿How i can read it?
Now, im my C3 there are a file named "current.log", but it is a old file, that have not changed for long time ago.
Thanks a lot.
Photo of Erik Blanco

Erik Blanco

  • 90 Points 75 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 42,500 Points 20k badge 2x thumb
As far as I unterstand the logging messages are send to a syslog server - the server will save it to the file.

D2_desk(su)->show logging local
Syslog Console Logging enabled
Syslog File Logging disabled

Check the "Enabling Console Logging and File Storage" section in the configuration guide.
Photo of Paul Poyant

Paul Poyant, Employee

  • 3,516 Points 3k badge 2x thumb