mcmgr process has crashed

[eyeV]

Hi everybody.

I have a strange message in log.
Process mcmgr pid 1487 died with signal 11Then switch immediately reboted.

What does this proceess responsible for?

[Rahmathullah__S]

Hi,
From the logs "Kernel paging" it appears that Kernel crash occurred and this mostly occurs because of memory corruption in kernel.

Can you please refer below link and try to correlate with your case if matches:

https://gtacknowledge.extremenetworks.com/articles/Solution/xos0060100-Kernel-oops-occurs-due-to-mem...

I would recommend you to open a GTAC case for further investigation and if required.
explanation

Many thanks,
Syed

[Ryan_Mathews]

Is there anything you'd like us to work on, with respect to GTAC Knowledge? Its a new site, so maybe you just mean you're still getting used to it as a resource. Either way, let us know if there is an improvement you'd like us to work on.

[eyeV]

I'm sorry. https://clck.yandex.ru/click/dtype=stred/pid=20/cid=71883/path=page-translation.fulltext/*https://sl... I can't get used to use GTAC Knowledge Base.

[Rahmathullah__S]

Hi,
For both Summit X480 & X670, EXOS 15.5.4.2 is recommended by engineering.


You can refer below link in future as well: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-Is-The-Recommended-Release-of-EXOS-For-M...

Syed