Message pending to save configuration XOS

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
Someone can tell me how I can validate the settings that are pending on the switch to validate extreme, I mean the asterisk that appears before the name of the switch.

This command does exactly cli-config-logging
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Balaji

Balaji, Employee

  • 776 Points 500 badge 2x thumb
Hello, 

Compare the output of commands to "show configuration detail" and "debug cfgmgr show configuration file primary". 

The "show configuration detail" has the configuration with new changes which are not saved. 
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Hi Balaji,  Thnks  But as in all settings identify this without saving? some joker appears?
Photo of Brandon Clay

Brandon Clay, Escalation Support Engineer

  • 13,086 Points 10k badge 2x thumb
Hi Jairo,

If you are running 15.6 or higher, there is a Python script that can compare the unsaved config with the saved config. 

https://github.com/extremenetworks/ExtremeScripting/tree/master/EXOS/Python/conf_diff