cancel
Showing results for 
Search instead for 
Did you mean: 

MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

Alok_Shukla
New Contributor III
MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device?
2 REPLIES 2

Naresh
Extreme Employee
Hi,

If the downstream device (e.g. switch, server, etc..) is using LACP LAG sharing on its ports, it will be necessary to enable LACP LAG on the MLAG ports. This has to be done prior to enabling the port for mlag


enable sharing port grouping algorithm addressed-based [ L2 | L3 | L3_L4 ] lacp

(the algorithm needs to match the downstream device)

BradP
Extreme Employee
Hi Alok Just create a load share group on the NAS. Remember, if LACP is required, you'll need to create single-port LAGs on the mlag ports as well. Brad
GTM-P2G8KFN