MLXe Rbridge vs VRID

  • 0
  • 2
  • Question
  • Updated 3 weeks ago
I am working on configuring VRRP instances in a pair of MLXe routers. Can the Rbridge ID and the VRID be the same value?  I was told they could not but our config shows otherwise.

Also, after poking around "the Hub" it appears that I can use the same VRID for all VLANs that will be used in both MLXe routers.  Is this good practice or just convenience?

Thank you.
Photo of Will Irizarry

Will Irizarry

  • 80 Points 75 badge 2x thumb

Posted 4 weeks ago

  • 0
  • 2
Photo of Mick Day

Mick Day, Employee

  • 220 Points 100 badge 2x thumb
Hi,

When using MCT the cluster rbridge-id must be unique on each device.

With respect to VRRP(e) VRID as you mention the same VRID can be used in each instance running in their own VLAN.

I have seen this done both ways many times, some just set VRID as 1 in every VLAN which is valid and works fine. Others vary the VRID for each VLAN but obviously there is only 1 to 255 available.

It simply comes down to what works best for you there is not a hard and fast rule for this.