cancel
Showing results for 
Search instead for 
Did you mean: 

mobility tunnel

mobility tunnel

Salvador_Gallo
New Contributor II
I have two controllers WC-35 with version 10.31.01.0048, and C4110 with version 09.21.10.0005, and i would like configure mobility tunnel between tow controllers, the controller´s dont have HA, this is possible?
14 REPLIES 14

Ronald_Dvorak
Honored Contributor
I'm sorry but it's hard to help if you don't provide exact information.....

1) what is the IP of controller#1&2 interface that you'd like to use for mobility and how are the interface topologies are configured = physical or bridge@EWC

2) could you ping the IP this IP from controller#1 and vice-versa

sorry, the Second octet is 15 for both segment of network, 10.15.2.254/24 and 10.15.3.254/24

That IPs don't match with the IPs in the error message that you've provided...

"manager: Mobility tunnel establishment failed with Peer 10.15.2.254."

this is the information of controllers:

controller 1: interface physical 10.10.2.254/ 24 with Ap registrering, version 09.21.10.0005
controller 2: interface physical 10.10.3.254/ 24 with Ap registrering, version 10.31.01.0048

and ping is successfull in both directions.

but controller 1 have 61 VNS configured and other controller have 3 VNS.

GTM-P2G8KFN