MPLS Tunnel?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
dears,

here there anybody can guide me if extreme summitX450-24x DC  switch sport to MPLS Tunnel ?
Iam try to connect tow switches as MPLS Tunnel, and how i can make configuration to both tow extreme switches MPLS tunnel ? 
Photo of MUNIR ENG

MUNIR ENG

  • 1,256 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Brandon Faircloth

Brandon Faircloth, Alum

  • 284 Points 250 badge 2x thumb
The MPLS Feature Pack is supported on the below platforms:

  • Summit X460, X480, X670, and X770
    series switches.
  • E4G-200 and E4G-400 cell site routers.
  • BlackDiamond 8900 xl-series modules.
  • BlackDiamond 8900 xm-series
    modules.
  • BlackDiamond X8 series switches.
You can see the full list of feature license requirements at:

http://extrcdn.extremenetworks.com/wp-content/uploads/2014/04/ExtremeXOS_Feature_License_Requirement...
Photo of MUNIR ENG

MUNIR ENG

  • 1,256 Points 1k badge 2x thumb
does this mean a switch type summit X450-42x DC S.W version 15.3.1.4 does not have the support for MPLS Tunnel?
Photo of Kawawa

Kawawa, GTAC

  • 3,292 Points 3k badge 2x thumb
That is correct, there is no support for MPLS on the X450 series
Photo of Ko Saw Gyi

Ko Saw Gyi

  • 192 Points 100 badge 2x thumb
Upgrade XOS version 16.xxxx. It's support MPLS.
Photo of Henrique

Henrique, Employee

  • 10,302 Points 10k badge 2x thumb
Hi Ko Saw Gyi, just want to share that the maximum supported EXOS version for X450 is 15.3.x and there is no support MPLS.