MU/client report with AP3912i

  • 0
  • 2
  • Question
  • Updated 3 months ago
  • Answered
I've a "special" setup which looks like that....

AP3912i --> wired port#3 connects an AP3801i and MUs are connected to this AP with a bridge@AP topology.

Everything works but the thing that bugs me is that the MUs are shown as 802.3 clients in the client report.

That isn't completely wrong because the MAC is bridge@AP on the AP3801i to port#3 of the AP3912i but I thought that the 802.11 information would take precedence over the 802.3 information in the report.

example>  the first line show the AP3801i connected to P3 of the AP3912, the other 2 clients are connected via wireless to the AP3801i but are shown as wired on the AP3912i




-Ron
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 44,150 Points 20k badge 2x thumb

Posted 4 months ago

  • 0
  • 2
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,054 Points 20k badge 2x thumb
Please open a GTAC case.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 44,150 Points 20k badge 2x thumb
If a client in my scenario is moviing from the AP3801i to another AP (AP3825e in the below example) that has a direct CAPWAP connection the port/protocol is still 802.3 even the MU is clearly connected via 802.11 (screenshot below).