NAC Manager - VR-Router Name cannot be editing

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)
i want that NAC Manager (Netsight) configure the RADIUS on my EXOS Switches (X450-G2 V16.1.3.6-Patch-1-7). But i cannot change to Virtual Router Field to VR-Default - i get only the error below:



if i use vr-Mgmt it will be accepted - but this is wrong.

Does anybody know this error message ?

What needs to be changed that VR-default will be allowed ?
Photo of M.Nees

M.Nees, Embassador

  • 9,168 Points 5k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Matthias,

How the switch is configured with Netsight , is it via mgmt or default IP ?

Thanks,
Suresh.B
Photo of M.Nees

M.Nees, Embassador

  • 9,168 Points 5k badge 2x thumb
The switch is managed by VR-Default!
Any advices how can i set the RADIUS to VR-Default ?!
Photo of OscarK

OscarK, ESE

  • 7,702 Points 5k badge 2x thumb
In 7.0.3 I can change the virtual router of an already added switch to VR-Default or VR-Mgmt and that works. In 7.0.4 I get the same error as you see. 
If you delete the switch and add it back to NAC (control ) with VR-default does that work ?
(Edited)
Photo of M.Nees

M.Nees, Embassador

  • 9,168 Points 5k badge 2x thumb
Hi Oscar,

it seems that there is a sleeping bug in the software. i use Netsight V6.3.0.179.

I delete the switch and reenter then i got a little different message:



i think i open a case to clarify...
Photo of M.Nees

M.Nees, Embassador

  • 9,168 Points 5k badge 2x thumb
Hi Oscar,

could it be that this error occur if the switch have already a radius config ?!

i ecpect that if i define the value this will overrite the already configured settings.

Regards
Photo of OscarK

OscarK, ESE

  • 7,702 Points 5k badge 2x thumb
Hello Matthias, maybe because it already has a config but I think there might be something wrong in NAC. I think you should log a case so this can be handled properly and fixed if it is a bug.
Photo of M.Nees

M.Nees, Embassador

  • 9,168 Points 5k badge 2x thumb
Case Number: 01242213