Need Assistance on identifi WIFI setup with tunnel ssid and bridge ssid at the same time

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Dear All,

In one of our client they have a requirement of IPV4 and IPV6 both with SSIDs, there are 8 SSID created in the controller out of 5 SSIDs are with IPV4 Bridge Traffic Locally @ Controller tagged all the respective VLANs to the SSIDs and to the controller port and 3 SSID with IPV6 Bridge Traffic Locally @ AP tagged respective to SSID with controller port., controller uplink is connected to one of the core and from core up link connected to stack poe SW.

Please let me know which all VLAN need to tagged in the AP connected poe ports.
Photo of Nagaraj Kukke

Nagaraj Kukke

  • 222 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,588 Points 5k badge 2x thumb
Hello Nagaraj

You might find the answer to your question in this thread: https://community.extremenetworks.com/extreme/topics/difference-between-tag-and-untag-in-topology-cr...

Best regards




-Gareth