NetSight 6.2 Appliance - Default Username

  • 0
  • 1
  • Question
  • Updated 3 years ago
I just deployed the OVF for NetSight 6.2.0.199 and the instructions state to login to the console with the user account used during installation, of which the only option was the root user. I can't find any documentation stating otherwise but the root user and password do not work to log into http://<ip address>>:8080 so I'm stuck and unable to move forward. Does anyone know of another default username and password to try in this case?
Photo of Andrew Schmitt

Andrew Schmitt

  • 310 Points 250 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Andrew, 

When you went through the installation procedure in the OVA installation, you log into the appliance using the login root.  As part of that process it asks you to create a password, this password is what you then log into that system moving forward.  If you went through the installation but did not change the password, the password is null.  If by chance you did change it and cannot remember, I would delete it and redeploy paying attention to remember the password you select. Let me know...

Bill
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Andrew, 

That is the password for the virtual controller, Netsight on the other hand has no password by default, it prompts you to add it.  If you don't remember you should just delete and redeploy.

Bill
Photo of Andrew Schmitt

Andrew Schmitt

  • 310 Points 250 badge 2x thumb
Bill,

Thanks for getting back to me. I did change the root password during setup, and so I tried using root and that password to login to https://netsight_ip:8444 but that didn't work. I've tried admin, root, administrator, etc on the login from this page and none have worked with a blank password. So at that point I redeployed the OVF just to see if I missed something and I don't think I did. Am I going to the wrong page for log in?
Photo of Andrew Schmitt

Andrew Schmitt

  • 310 Points 250 badge 2x thumb
The only thing that I wasn't clear on was if I needed a second IP for NetSight as I was asked for two IPs during setup and I chose the same one.
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Andrew, 

Whatever the password you used for the install should work...http:// <ip-address>:8080
or on https://<ip-address>:8443

As long as you can ping it you should be good!

Good luck ...

Bill
Photo of Andrew Schmitt

Andrew Schmitt

  • 310 Points 250 badge 2x thumb
Looks like the download was for the NAC appliance and not the NetSight appliance, so chalk that up to not paying attention to the OVA download :) 
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,016 Points 5k badge 2x thumb
Oh yes... That one you cannot login with the web interface...  Glad you figured it out!  Good luck and let us know if you need anything else!