netsight_appliance_64bit.6.3.0.168.ova not work access to the Web console after installation .

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
I've done seven facilities in 3 different vmware appliance servers but can not open the web session and reviewing the list of ports are not available on 8080 and 8083 , 8084 .

when running on the server the command netstat -an | grep -i LISTEN sample having only few ports open , you can see the image.
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
I had posted the wrong info for you. Im sorry for that. I do believe I have an answer for that one too. Ill be right back with that
(Edited)
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
Here you go, try this.
sudo iptables -A INPUT -p tcp --dport 8080 -j ACCEPT
sudo iptables -A INPUT -p tcp --dport 8443 -j ACCEPT

Let me know if this helps.
(Edited)
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
youll have to remove the break symbols out. I dont know why it keeps adding them
Photo of Drew C.

Drew C., Community Manager

  • 38,610 Points 20k badge 2x thumb
Welcome to The Hub!
Formatting with code and pre tags can be weird here.  I went ahead and fixed that post for you :)
(Edited)
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
Thank you
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
I'll try and tell you
Thks
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
don ́t work with this command.
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
The command didn't work or the command didn't fix it?

I was able ro replicate the issue and it resolved it
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
the command was not run
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
ok, try this one.

/usr/postinstall/dnetconfig

This will take you through the network config again. Accept the defaults shown (It is what is already configured) and then restart with this line

shutdown -r now

try this and let me know
Photo of Joseph Burnsworth

Joseph Burnsworth

  • 2,328 Points 2k badge 2x thumb
Did you happen to get this working?