Netsight Map view

  • 0
  • 1
  • Question
  • Updated 5 months ago
  • Answered
Hi Guys,i have created a new map in netsight with Juniper MX 104 and Extreme Networks Switche.I have now the problem that  I have no automatic links on  my map, llpd protocoll is on.An another Problem is that I can not change the interface on my map from the router from access to interswitch.
I am find nothing in the Internet about.....
Who can help me
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb

Posted 5 months ago

  • 0
  • 1
Photo of SH

SH

  • 5,320 Points 5k badge 2x thumb
Hello,

this post gives more informations according the automatic link creation.

https://community.extremenetworks.com/extreme/topics/oneview-maps-building-links-between-non-extreme...

In addition if you have still problems a workaround can be to draw the links manually.

Best regards
Stephan
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Hi,
thx for the answer.llpd works good and i see all information i need.

The problem is that i can see on  the map only links witch configuration interswitch.In some of the connection are access and i can not change it on the map or on teh router......:-(
Photo of DH

DH

  • 1,104 Points 1k badge 2x thumb

I also have this problem with non-extreme devices. The lldp neighbor information shows each other on both nodes but the links are not created between them. I have also imported the MIBs from the vendor into the 3rd party folder and this does not help. I have even tried manually creating the links and when the screen refreshes they disappear.

I was told it would be fixed in version 8.1 but I am running 8.1.2.59 and it's still not fixed.

Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Yes, this is what i do not like by Extreme...
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
I have no idea what i can do yet....When i want to creat a limk i must configure this link auf interswitch.This is unfeasibly...
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Point one.i must unlook 0ne port on my router, only port to create a new link
Pont 2.I must unconfigure the port to interswitch to se the link in my map
How can io do it......
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Good Morning boys and girls.
i can ́t believe that nowbody can help me.
I think this is a great problem of the management software from extreme and it ́s incredible that
nowbody fixthis bug.

My Question again. 

How can i change the link-mode between the nodes on my maps to type Interswitch?Only this types will displayed on the map:
THOMAS
 
Photo of SH

SH

  • 5,318 Points 5k badge 2x thumb
Hello Thomas,

I can not confirm the behavior, you told, with my installation. I can create links with interswitch and access ports with different third party devices

Best regards
Stephan
Photo of SH

SH

  • 5,318 Points 5k badge 2x thumb
I am using version 8.1.3.65 and the links are printed in the maps.
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Ok,
I am using version 8.1.2.59.
Photo of dr.watson

dr.watson

  • 342 Points 250 badge 2x thumb
Hi,
THX for the great hint to help me.After upgrading to the new version of Netsight the maps work perfekt.
Thank you for the hint..
Thomas