Netsight Maps for Multi-Floor Buildings

  • 0
  • 3
  • Question
  • Updated 3 years ago
  • Answered

It does not appear to me that the Netsight Building Maps feature has any ability to account for multi-floor buildings in showing coverage heatmaps, etc. (as Ekahau does).  IE, it does not appear that you can specify when creating a floor plan, that there is a floor above or below it, and display the RF coverage that will bleed through the floor.

1. Has anyone found a work-around to this? Such as, if you import a Ekahau site survey file with multiple floors mapped, does Netsight show the signal from the other floors?

2. Are there any plans to configure a map/building to contain multiple floors?


Thanks!

Photo of Schmotter, Ryan

Schmotter, Ryan, Employee

  • 650 Points 500 badge 2x thumb

Posted 3 years ago

  • 0
  • 3
Photo of Bob Maheu

Bob Maheu, Employee

  • 1,040 Points 1k badge 2x thumb
Hello Ryan,

I'm currently checking with Engineering on this one, but I do not see that we take this into account.
Photo of Bob Maheu

Bob Maheu, Employee

  • 1,040 Points 1k badge 2x thumb
Hello Ryan,

1.  When importing the Ekahau files  it will import only the floor not the signal – signal is calculated by the NetSight.
2.  NetSight calculates only for one floor.