Netsight SNMP Traps Failed

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
we have Netsight and XOS switches. we are having a problem regarding the traps in netsight specially in One View. we can successfully add trap receiver in Netsight Console but in One View the Trap Status is "Set Failed".
what am I missing? thanks

below are my screenshot:

Photo of Marlon


  • 1,570 Points 1k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,536 Points 3k badge 2x thumb
Hi Marlon,

As per below article once we configured trap receiver in netsight it will be enabled on switch.

to make sure the switch configuration please check below steps.