Netsight states that a device is down when its not

  • 0
  • 1
  • Problem
  • Updated 1 year ago
  • Not a Problem

Hi there, hopefully someone can help me.


I have a 460-G2 that was connected to Netsight, I had to replace the Master switch as it was having POE issues, now another switch is master but its not being seen by Netsight, stating its down, even though it show an active link.

I tried removing the stack and adding it back... Its still states that its down but now it doesn't show an active link. I've also tried removing the SNMPV3 link and adding them back with no luck.

Netsight: 7.0.6.27

Cheers

Photo of Tristram Barton

Tristram Barton

  • 140 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Daniel B

Daniel B

  • 360 Points 250 badge 2x thumb
Have you cleared the Alarm in Netsight "Alarms" log?
Photo of Tristram Barton

Tristram Barton

  • 140 Points 100 badge 2x thumb

I've cleared all the alarms

Photo of Tristram Barton

Tristram Barton

  • 140 Points 100 badge 2x thumb
Also SSH2 no longer works
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 47,404 Points 20k badge 2x thumb
Could you even reach (=ping) the switch from EMC ?
Photo of Drew C.

Drew C., Community Manager

  • 38,546 Points 20k badge 2x thumb
Hi Tristram, are you still having trouble with this?