NetSight - Tree View - Data Display Format - Group Delimiter

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
In NetSight Console Option we can configure a character as an automatic group delimiter on the tree view. 
So, in this way, when you access devices tree view --> Location... groups & sub-groups are made according with this "delimiter character"

However, on OneView... this character is not taken into account.

Anyone knows how we could get the same subdivision on "devices tree" showed at OneView?

Thanks a lot in advance.
Fernando.
Photo of Fernando CALVELO

Fernando CALVELO

  • 190 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,498 Points 5k badge 2x thumb
Fernando, can you provide a screen capture similar to the below? This is working here. The location Column will keep the delimiter in there regardless, as in console.

Photo of Fernando CALVELO

Fernando CALVELO

  • 190 Points 100 badge 2x thumb
Yes... because in your example character is the default one "/"
However.... we have modified on Console View to "-", and it works perfect within the console view (subgroups split). However, this "character" is not taken into account for OneView

NetSight Console Screenshot


OneView Screenshot
(Edited)
Photo of Fernando CALVELO

Fernando CALVELO

  • 190 Points 100 badge 2x thumb
Any news about how we can do this?

Thanks a lot in advance for your replies.
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,498 Points 5k badge 2x thumb
Fernando, What version of Netsight is this?
Photo of Fernando CALVELO

Fernando CALVELO

  • 190 Points 100 badge 2x thumb
v.6.3.0.162
Photo of Drew C.

Drew C., Community Manager

  • 37,366 Points 20k badge 2x thumb
Hi Fernando,
I'm going through some older threads here and wanted to ask if you still need assistance with this.