New GTAC Knowledge Articles July 26 - August 1, 2015

  • 0
  • 2
  • Article
  • Updated 3 years ago
  • (Edited)
Here are the new articles that were published last week (July 26 - August 1, 2015) in GTAC Knowledge:

Sunday July 26, 2015
Netsight install fails with Installer exiting with code: 127

Monday July 27, 2015
OSPF neighbor is in Init state
Change in mirroring configuration after adding a new node to stacking

Tuesday July 28, 2015What is the Default IP Address for the C2-Series?
How to add ports to vlan through ScreenPlay
How to add assign the user based on his location
D2-Series sent unknown trap with MIB OID: 1.3.6.1.4.1.6132.1.1.1.50-1
Which version of EXOS code is supported on my hardware?
How to specify multiple file names separation in DHCP option 43
Poor performance with the AP3705 running 9.15.05 firmware.
NAC DNSProxy no longer operates after transfer from changing appliance hardware or deploying new VM

Wednesday July 29, 2015
Question on K series and fabric module redundancy
How to block LACP PDUs via ACL
How to restrict SNMP access
Wireless B/G users report slow connections
Not able to see the egress traffic of a mirrored port when monitoring using a virtual machine
Remote port mirror configuration

Thursday July 30, 2015
How to generate WM3000 Series Software License Key
Set Default Role for a port in Policy Manager
Remote port mirror configuration
802-1x-authentication-doesn-t-work-for-Wireless-Clients-using-NAC-as-RADIUS-with-LDAP-Server
Wireless B/G users report slow connections
Not able to see the egress traffic of a mirrored port when monitoring using a virtual machine

Friday July 31, 2015
Syslog from XOS devices have no source IP or device name
Unable to reach the tftp server from the switch to download new firmware
SecureStack boot loop with Fault(0x00000100)
How to restore a DEM database backup in Dragon 8x
Slot recorded async queue is growing log
New VLAN Interface and Subnet Is Not Showign Up In Route Table
Do I need to request license upgrade for Netsight Suite when upgrading it from version 4.4 to 5.1 or superior?

Saturday August 1, 2015
Users Connect To SSID, But Do Not Pass Traffic (Report Shows Avg Rate of 0/#), AP Reboot Resolves Issue
Where is the syslog files on a Netsight Appliance?
How to deploy changes from command line on the DSCC SIEM
Is the N-Series power supply hot-swappable?
SNMP Master process crash with Signal 6
Excessive radius accounting retransmission failed mac learning over LAG link
How is a new group added in NetSight
How To Remove An Option Module/Daughter Card From An S-Series I/O or Fabric Module
How to install a SIEM sfs upgrade patch file
How does NetSight use syslog files
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 3 years ago

  • 0
  • 2

Be the first to post a reply!