2015-10-26: New GTAC Knowledge Articles October 18 - October 24, 2015

  • 0
  • 2
  • Article
  • Updated 3 years ago
  • (Edited)
Here are the new articles that were published last week
(October 18 - October 24 2015) in GTAC Knowledge:

Sunday, October 18, 2015:
Unable to add route to unit , rc Entry exists. Shadow problem.

Monday, October 19, 2015:
Can I enable NTP on multple Virtual Routers simultaneously?
How to access arp entries in a user created VR via SNMP
Losing NTP system peer when VRRP mastership is changed
Why do I see MINT traffic at my remote site with my wm3700 controllers?
Installing EXOS 15.5 on a Summit X480 with Bootrom Version 2.0.1.7
Configuration of 31 Bit subnets on EXOS
How to create an acl matching only arp reply packets
Does EXOS have a command to list the ARP pending entries
SecureStack B5 not passing IS-IS traffic
G-Series is reporting Power Supply # AC or # DC are not working properly
Dragon: What signatures detect the SYNful Knock vulnerability

Tuesday, October 20, 2015:
Policy Manager freezes
What are the power, UPS, and A/C requirements for the S-Series chassis
Are there CLI editing shortcuts in EXOS?
Unable to get PSU alarm from x460 switch in Ridgeline
How to get the serial number of Altitude Access Points.
Configure EXOS SNMPv3 with AES block cipher and Netsigt 6.2 or above
Reason behind log message " Slot: pca9506_read, not enough buffer provided "
Error when SR XFP inserted
why is process bcmRX going high
Do Extreme Switches Support VLAN Name in the Tunnel Attribute of RFC3580?
After Controller Policy Rule/Role Change, Wireless User Does Not Have Correct Policy
Are TCP-SWEEP events false positives in Dragon IPS?
K-Series Not Powering PoE Device That is Reporting Insufficient Power
IdentiFi v9 Rest of World License Voucher will not Activate to Uganda
Summit and BlackDiamond download with error: Failed to download image - tftp: sendto: Network is unreachable
Chromebook connecting to IdentiFi wireless AP shows at login screen: Network Not Available
Stack port flapping on X670-G2 switches

Wednesday, October 21, 2015:
Problem redirecting the guest users to the Registration portal of NAC - Errors written in the logs about Broken Pipe
SecureStack is not applying VLAN egress
Not seeing IP or host names when doing NetSight Compass search
NAC - IDM setup not seeing username and IP addresses in End systems.

Thursday, October 22, 2015:
100 Base-TX SFP shows operational status up with nothing connected on the S-Series
SG1201-0848-F6 DOES NOT BOOT Bad NVRAM csum seen in console during boot.
How to configured Identity Management for XoS in NAC Manager
Why does radius mgmt-access in X460G2 revert to disable on an enforce from NAC Manager?
Set login banner via OneView script fails
Can my v2110 esa0 and esa1 ports be connected to the same vswitch in vmware
Siem: When when IE v11 be supported on the Siem dashboard?
Dragon: The version 8.3 ISO has unsupported version of Ubuntu
A4 non-POE units show Fan1-Status as "Not installed"
WS-AP spontaneous crash with message "Oops: Kernel access of bad area, sig: 11 [#1]"
Switch Port state is still active when using Ifconfig down command on Linux end-device
Wireless client authentication issue - showing in NAC End-Systems with Reason "Rule: "802.1X Placeholder"

Friday, October 23, 2015:
Module resets and Logs Error Loss of Chassis Fabric
i2C EEPROM error messages during reboot
NAC DNS Configuration Deleted After Appliance Reboot
After policy is applied to D2 switch Policy Manager shows policy is NA - D2 policy is NA
Intermittent client disconnects when connected to Radio 2 (2.4 GHz); AP logs showing "Too many entries! (xx) Breaking Out!" messages.
SMON port statistics counting
Password Recovery for the V2 Family Switches
S-Series showing Drop Evts, In Errors, an Oversize RMON counters increment on ports
Summit X670V crashes after "show bgp neighbor" command executed

Saturday, October 24, 2015:
Alarm notifications associated with traps not triggering in NetSight after reboot
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 3 years ago

  • 0
  • 2

Be the first to post a reply!