no access via console switch 08g20g4

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Solved
I've got a problem with the access to switches 08g20g4-24p.
I set parameter correctly but I can't enter on the switch.
By web browser there are no problems, but icon of console is always light off.
My cable is ok, because it work with other devices.

HElp me please!!!
Photo of Claudio Di Cara

Claudio Di Cara

  • 100 Points 100 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,114 Points 50k badge 2x thumb
"My cable is ok, because it work with other devices.'

Is that other device a 800series switch or another switch model because console cables are not the same for all models.
Photo of Claudio Di Cara

Claudio Di Cara

  • 100 Points 100 badge 2x thumb
but on the manual is not requeste special cable....
I had used for mony device huawei and cisco...and it works very well.

I don't understand...
Photo of Erik Auerswald

Erik Auerswald, Embassador

  • 13,772 Points 10k badge 2x thumb
The Cisco cable does not work with Extreme switches. The 800-Series uses the same cable as the EOS switches, e.g. S-Series or D-Series.
Photo of Claudio Di Cara

Claudio Di Cara

  • 100 Points 100 badge 2x thumb
Yes...I' d checked pinout and it is different.

Thank a lot everybody...good work....bye from Sicilia.
Photo of Henrique

Henrique, Employee

  • 10,342 Points 10k badge 2x thumb
Hi Claudio, as already said by Ronald, the Pinout Assignments might be different among platforms.

For 800-Series you have the following:

An optional console cable (08A-CON-CBL) is required if you want to locally manage the switch via the front panel RJ45 console port. The cable is terminated by an RJ45 connector at one end and by a DB9 female connector at the other end. Using an RJ45-to-DB9 female cable, you can connect products equipped with a RJ45 console port to an IBM or compatible PC running a VT series emulation software package.





You can get this information in 800-Series Hardware Installation Guide.

Photo of Claudio Di Cara

Claudio Di Cara

  • 100 Points 100 badge 2x thumb
thanks a lot.
I use a Cisco Cable, but I don't know pinput assignments.

Again thanks a lot.