Not able to create vrrp in X460-48t summit switch

  • 0
  • 1
  • Problem
  • Updated 5 months ago
  • Solved

X460-48t.3 # show version

Switch      : 800538-00-10 1515N-43544 Rev 10.0 BootROM:    IMG: 

PSU-1       : PSSW301201A -02 800519-00-06 1512A-40004

PSU-2       : PSSW301201A -05 800519-00-06 1710A-40145


Image   : ExtremeXOS version v1553b4 by release-manager

          on Fri Nov 7 12:56:24 EST 2014

BootROM :

Diagnostics : 6.3

X460-48t.4 #


Below is part of where the issue is...


# Module vsm configuration.


X460-48t.3 # 

X460-48t.3 #

X460-48t.3 # create vrr


%% Invalid input detected at '^' marker.

X460-48t.3 # enablr


%% Invalid input detected at '^' marker.

X460-48t.3 # enable vrr



You can see the list of command available for VR.


X460-48t.3 # enable

  access-list           Access list

  auto-provision        Allow switch to obtain the IP Address, Gateway, Config file via DHCP

  bfd                   BFD specific settings

  bootp                 Configure BOOTP client

  bootprelay            Configure BOOTP Relay service

  cdp                   Cisco Discovery Protocol (CDP)

  cfm                   IEEE 802.1ag - Connectivity Fault Management

  clear-flow            CLEAR-Flow agent

  cli                   Command Line Interface settings

  cli-config-logging    CLI command logging

  clipaging             Display command output one screenful at a time

  cpu-monitoring        Monitor system/process cpu utilization

  dhcp                  Configure DHCP client

  diffserv              diffserv

  dos-protect           automatic denial-of-service protection

  dot1p                 dot1p

  eaps                  EAPS (Ethernet Automatic Protection Switching) domain

  edp                   EDP

  elrp-client           ELRP (Extreme Loop Recovery Protocol) Client

  elsm                  ELSM (Extreme Link Status Monitoring)

  erps                  Ethernet Ring Protection Switching (ITU-T G.8032)

  esrp                  ESRP (Extreme Standby Router Protocol) Domain

  ethernet              Ethernet OAM

  fdb                   Configure FDB related parameter

  fip                   FCoE Initialization Protocol

  flooding              flooding

  flow-control          Pause frame handling

  icmp                  icmp option

  identity-management   Identity Management

  idletimeout           Timeout for idling configuration session

  igmp                  Internet Group Management Protocol

  ip-fix                Enable IPFIX module

  ip-option             ip option

  ip-security           IP Security

  iparp                 ip arp command

  ipforwarding          IP forwarding

  ipmcforwarding        IP Multicast Forwarding

  iproute               IP routing module

  irdp                  ICMP Router Discovery Protocol

  jumbo-frame           jumbo-frame

  learning              learning

  led                   LED display functions

  license               license or feature pack

  lldp                  Configure LLDP specific settings

  log                   Configure log service

  loopback-mode         loopback

  mac-lockdown-timeout  mac lockdown timeout

  mirror                Mirror feature configuration

  mlag                  Multi-switch Link Aggregation used to combine remote ports and local ports to a common logical connection

  mld                   Multicast Listener Discovery Protocol

  mvr                   Multicast VLAN Registration

  mvrp                  Multiple VLAN Registration Protocol

  neighbor-discovery    IPv6 neighbor

  netlogin              Network Login related commands

  ntp                   Network Time Protocol

  pim                   PIMv6 cache entries

  ports                 Physical ports

  radius                Radius Client

  radius-accounting     Radius Client Accounting

  rip                   RIP Routing

  ripng                 RIPng Routing

  rmon                  RMON CLI command

  router-discovery      IPv6 Router Discovery

  sflow                 Enable SFLOW module

  sharing               Load sharing

  smartredundancy       smart redundancy on a port(related to Software redundant port feature)

  snmp                  Enable SNMP

  snmpv3                SNMPv3

  sntp-client           Enable SNTP client

  stacking              Stacking

  stpd                  STP domain

  subvlan-proxy-arp     Configure sub-VLAN proxy ARP

  syslog                Configure syslog service

  tacacs                TACACS+ Client

  tacacs-accounting     TACACS+ Client Accounting

  tacacs-authorization  TACACS+ Client Cli Authorization

  tech-support          Technical support

  telnet                allow incoming telnet connections

  tunnel                tunnel

  udp-echo-server       UDP-Echo Server

  upm                   Universal port manager

  virtual-router        virtual router

  vlan                  VLAN configuration

  vm-tracking           Virtual Machine mac tracking

  vman                  Virtual Metropolitan Area Network

  vr                    virtual router

  watchdog              watchdog monitoring feature

  web                   Web access

  xml-mode              Raw XML configuration mode

  xml-notification      XML Notification Process

  <eapsDomain>          EAPS domain name
Photo of Sunday Orjingene

Sunday Orjingene

  • 90 Points 75 badge 2x thumb

Posted 6 months ago

  • 0
  • 1
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,174 Points 10k badge 2x thumb
Hello Sunday,

Can you show us the "show license" output?
Photo of Sunday Orjingene

Sunday Orjingene

  • 90 Points 75 badge 2x thumb
* X460-48t.6 # show licenses 
Enabled License Level:
Enabled Feature Packs:
* X460-48t.7 # 
Photo of Patrick Voss

Patrick Voss, Employee

  • 11,174 Points 10k badge 2x thumb
Photo of Sunday Orjingene

Sunday Orjingene

  • 90 Points 75 badge 2x thumb
Thank you Patrick
Photo of Bin

Bin, Employee

  • 5,076 Points 5k badge 2x thumb
The following URL shows features in our license modules on EXOS.