Please help me clarified about SNMP Community Index, Community Name and Security Name???

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Please help me clarified about
SNMP Community Index, Community Name  and Security Name??? 
How to configure SNMP on extreme switch?

I want to send SNMP trap to Monitoring Server.
I am using ExtremeXOS version 15.3.3.5 v1533b5-patch1-6

SNMP Version : version 2
Community : public



Below is my sample configuration. Please help to check. 

configure snmp add trapreceiver 10.10.50.30 community public

configure snmpv3 add community public name public user public

enable snmp traps port-up-down ports all


Appreciate your help and suggestion. Thanks. :)


-Paul
Photo of Paul

Paul

  • 2,026 Points 2k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Paul,

What is the SNMP tool that you are using ?

Thanks,
Suresh.B
Photo of Paul

Paul

  • 2,026 Points 2k badge 2x thumb
Hi Suresh,

PRTG Network Monitor 15.3.19.4027. Thanks.
I would like to know "How to configure/ basic setup of SNMP on extreme switch".
as i mention above. i will use SNMP version 2. public.

thanks.
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Paul,

I hope below KB article would help you.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-set-up-SNMPv3-on-EXOS

Thanks,
Suresh.B
Photo of Paul

Paul

  • 2,026 Points 2k badge 2x thumb
Thanks, it helps. my case is version 2.
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Paul,

Yes , this article has configuration for V1,V2 and V3.

Thanks,
Suresh.B