cancel
Showing results for 
Search instead for 
Did you mean: 

Policy B5

Policy B5

Jefferson_Lemos
New Contributor
Hello,
I am having trouble applying default policy on a port B5, reports the below error:

3a6e924991ca46adb43a3058fed665cd_RackMultipart20160826-63074-10i51bb-Enforce_Error_inline.png



I'm using the default policy, someone help me?
12 REPLIES 12

Jefferson_Lemos
New Contributor
Hello,

Thank you all for your help, I ended up finding the problem.
I suspected it was something related to NMS have not installed properly why not the default roles he applied, then installed a new version and it worked perfectly.

It's nothing related to software error, I think something happened during installation the OVA of NMS.

regards !!!

Thanks for letting the Community know how you sorted this out Jefferson. Good stuff!

Daniel_Coughlin
Extreme Employee
Hi Jefferson,

If you are still having issues sorting this out it may be helpful to give the GTAC a call.

Erik_Auerswald
Contributor II
Hi Jefferson,

you should probably check both the switch and verify that the Policy Manager displays information consistent with the switch config.

The output of
show config should contain a policy section.

Br,
Erik
GTM-P2G8KFN