cancel
Showing results for 
Search instead for 
Did you mean: 

Port cannot belong to VLAN and a VMAN at the same time.

Port cannot belong to VLAN and a VMAN at the same time.

Drin
New Contributor
Trying to configure QinQ solution between two extreme switches and im facing an issue when trying to make one of the ports untagged:

| Error: 8: Port cannot belong to VLAN and a VMAN at the same time.|

This port is not configured in any VLAN or VMAN as Untagged

This issue a get only in one SW, in the other one im able to configured the port as untagged.

The only difference between SW are the Image version running. But im not sure if that is the case?
19 REPLIES 19

Drin
New Contributor
Hi all,
First i want to thank you for the support.

Since i have a live network i was unable to perform the upgrade in image and i was wondering if someone can advice me for any other solution.

So what i need is QinQ solution.

SW-01
Port-01-Local(Multiple VLAN's)
Port-02-Outgoing(Fixed Single VLAN-324)

SW-02
Port-01-Local(Multiple VLAN's)
Port-02-Outgoing(Fixed Single VLAN-324)

Is there any possibilities rather then using VMAN to be able to communicate VLANs related to port 1 in both SW.

Drin
New Contributor
I was through documentation but couldn't find something related to my issue.

I will try to make SW2 same image version as SW1 and will update the post.

Thanks for your contribution

Drew_C
Valued Contributor III
No worries. Just wanted to check.

Drin
New Contributor
Hi,

I still didnt get a chance to upgrade the switch.

I will update thread once done.

GTM-P2G8KFN