cancel
Showing results for 
Search instead for 
Did you mean: 

Port Protected Mode on 7100-Series?

Port Protected Mode on 7100-Series?

htw
New Contributor III
Hi,
on SecureStack switches, the Port Protected Mode was available. It prevented
The Protected Port feature is used to prevent ports from forwarding traffic to each other, even when they are on the same VLAN. Ports may be designated as either protected or unprotected.
Ports are unprotected by default. Multiple groups of protected ports are supported.
Is there an equivalent feature available on 7100-series?

2 REPLIES 2

Jason_Parker
Contributor
There is a video on this feature on youtube Although it is for the Secureatack family, it does provide some details check it out https://m.youtube.com/watch?v=RdELWTgVXLk

Alex24
Extreme Employee
Hello,

The 7100-series accomplish this using Secondary and Private VLAN's. We cover these features in our Configuration Guide under IP Routing Configuration > The Routing Interface > Secondary and private VLAN.

For quick reference here is a link to that section.
http://documentation.extremenetworks.com/EOS_Config/S-K-Series/S-K-7100_Configuration_Guide/c_second...

The configuration guide also contains a sample configuration.
http://documentation.extremenetworks.com/EOS_Config/S-K-Series/S-K-7100_Configuration_Guide/c_Privat...

-Alex
GTM-P2G8KFN