Print from wireless segment to wired segment is not working

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I have a printer in a wired segment with this ip 10.106.2.240/24 and my wireless segment is 10.106.3.0/24 but I can not print, ipforwarding is enabled in both vlans and both are reachable by ping. I have an x250e switch. and AP's are 3825i. Any idea?
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Paul Russo

Paul Russo, Alum

  • 9,694 Points 5k badge 2x thumb
Hey Juan

Is the wireless tunneled to controller or locally bridged?

Thanks
P
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 50,174 Points 50k badge 2x thumb
Could it be that the print service is working via multicast - that is disabled per default in the WLAN topology.

GUI > VNS > Topologies > select the Topology > select the multicast filters tab
You'd try it out and enable "multicast bridging" and add the "all multicast" + wireless replication.


I had the same issue with my Osram Lightfy (home automation) and with Apple TV.
Photo of juan romero

juan romero

  • 400 Points 250 badge 2x thumb
It ́s locally bridged. Now I can print but can not scan :S... I did enable "multicast bridging"