cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with memory

Problem with memory

Savio
New Contributor

Hello, colleagues!
Everyday we have trouble with our extrereme x480( ExtremeXOS version 15.5.2.9 v1552b9-patch1-5 by release-manager ). Memory at device to decreases to zero and rebooting.

I have seen on console:
Epm application wdg timer warning - 20 sec, kepc 0xffffffff8056a4d0(__mutex_lock_slowpath+0xc8/0x1f8) uepc 0x2abdc428.
Epm application wdg timer warning - 30 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 40 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 50 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 60 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 70 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 80 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 90 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 100 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application wdg timer warning - 111 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Application watchdog killing process 1082(epm) in state 2.
Epm application wdg timer warning - 111 sec, kepc 0xffffffff8056956c(io_schedule+0x4c/0x70) uepc 0x2abdc428.
Epm application watchdog timer expired - 1203 msec. Resetting the system.
Watchdog Rebooting........

fa6ba13f85194ee7b28d69ccd55a0d3a_RackMultipart20141217-7153-rvygul-memory_free-day_inline.png



I use device as L2 and L3 (BGP,OSPF) router

x480.4 # show iproute summary
=================ROUTE SUMMARY=================
Mask distribution:
1 default routes 16 routes at length 8
12 routes at length 9 30 routes at length 10
92 routes at length 11 265 routes at length 12
504 routes at length 13 1017 routes at length 14
1764 routes at length 15 13118 routes at length 16
7264 routes at length 17 11997 routes at length 18
24990 routes at length 19 35925 routes at length 20
37837 routes at length 21 56283 routes at length 22
48837 routes at length 23 119332 routes at length 24
225 routes at length 25 153 routes at length 26
144 routes at length 27 167 routes at length 28
71 routes at length 29 170 routes at length 30
6 routes at length 31 1668 routes at length 32

Route origin distribution:
2 IBGP 361640 EBGP 230 OSPFExt2
2 Blackhole 14 Direct

Total number of routes = 361888
Total number of compressed routes = 137742

Please help me! Thanks!
8 REPLIES 8

Stephane_Grosj1
Extreme Employee
That meant you were storing the routes into memory. x480 is capable to store up to 512k routes in hardware (more with compression enabled), but you have to configure the switch for that. The default is L2-and-L3, with 256k each. You were above that threshold.

Savio
New Contributor
#
# Module hal configuration.
#
configure forwarding external-tables l3-only
configure iproute reserved-entries maximum


Savio
New Contributor
I found what the problem is.
after write command:

configure iproute reserved-entries maximum
all is well

PARTHIBAN_CHINN
Contributor
You should have support contract for reaching technical assistance center.
You can call in and give ur serial number.
they will help u troubleshooting this problem.
http://www.extremenetworks.com/support/contact
Check the above link
GTM-P2G8KFN