problems upgrading from 7.0.1 to 7.0.2b

  • 0
  • 1
  • Problem
  • Updated 2 weeks ago
Hello,
I tried to upgrade a VDX 6740 from 7.0.1 to 7.0.2b

after the first reboot it won't come up anymore and five this error:

bhpc_irq_init: Using default device map. Size 10
bhpc_irq_init: Pcie domain 0 err interrupt handler Installed
Starting Dcmd ... Thu Sep 27 18:49:32 GMT 2018
server starting
Restoring DCM databasefree list corrupted, idx 589 already assigned!
.tp_register, got none fss tp handle=10000001h
2018/09/27-18:49:37, [HSL-1012], 7006,  INFO, VDX6740T, Interface lo is link up
2018/09/27-18:49:37, [HSL-1012], 7007,  INFO, VDX6740T, Interface eth0 is link up
2018/09/27-18:49:37, [HSL-1012], 7008,  INFO, VDX6740T, Interface eth1 is link up
2018/09/27-18:49:37, [HASM-1004], 7009,  INFO, VDX6740T, Processor reloaded - Reset.
....done

is there a way to recover from this situation ?

thanks


Photo of Riccardo Veraldi

Riccardo Veraldi

  • 282 Points 250 badge 2x thumb

Posted 3 weeks ago

  • 0
  • 1
Photo of Riccardo Veraldi

Riccardo Veraldi

  • 282 Points 250 badge 2x thumb
more information. after very LONG time the switch comes up but the standby party cannot come up

switch-ana-vdx01# sh ver

Network Operating System Software
Network Operating System Version: 7.0.2b
Copyright (c) 2017-2018 Extreme Networks, Inc.
Firmware name:      7.0.2b
Build Time:         20:16:44 Sep 13, 2018
Install Time:       18:15:51 Sep 27, 2018
Kernel:             2.6.34.6

BootProm:           1.0.1
Control Processor:  e500mc with 4096 MB of memory

Slot    Name    Primary/Secondary Versions                         Status
---------------------------------------------------------------------------
SW/0    NOS     7.0.2b                                             ACTIVE*
                7.0.2b                                             


I wish I can find a way to recover from this situation

Photo of Mick Day

Mick Day, Employee

  • 470 Points 250 badge 2x thumb
So it now looks like you only have a single partition

Netinstall should recover this, the procedure can be found here

https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-perform-netinstall-on-VDX-6740-6940-an...
Photo of Riccardo Veraldi

Riccardo Veraldi

  • 282 Points 250 badge 2x thumb
ok thanks a lot!
Photo of Riccardo Veraldi

Riccardo Veraldi

  • 282 Points 250 badge 2x thumb
when doing a Netinstall what will happen to the licenses ?
Photo of Mick Day

Mick Day, Employee

  • 470 Points 250 badge 2x thumb
They will be removed as the switch will be restored back to factory default configuration