cancel
Showing results for 
Search instead for 
Did you mean: 

Problems when setting the group for the Alarms - browser's issue?

Problems when setting the group for the Alarms - browser's issue?

Ilya_Semenov
Contributor
Hello, everybody!

I try to configure an alarms using Oneview. When try to select a group (to apply the alarm) I got a strange browser's interface issue (please, see the picture below). I've got this problem with many different customers in all browsers - IE, Chrome, Firefox.

How could the issue be solved?

The additional question is how to apply an alarm to a certain port? For example, "Interface % Utilization"?

Many thanks in advance,

Ilya

1ff5fdcfa4264e32aa84b3d02b37162e_RackMultipart20160513-33909-1o3dcd0-alarms_inline.jpg


11 REPLIES 11

Bob_Maheu
New Contributor
Hello,

I was able to replicate this in 6.3 when editing the alarm after it was created.

This no longer appears to be an issue with Extreme Management 7.x which is currently in an Early Access release state. The GA is scheduled for the end of the month or early July.

Hello, Bob!

So, you approve, that it was a bug?

Thank you.

Bob_Maheu
New Contributor
Hello Ilya,

Checking to see if you issue has been corrected.

Hello, Bob!

Great news! Waiting for information!

Thank you very much!
GTM-P2G8KFN