problems with ip route default

  • 0
  • 1
  • Question
  • Updated 9 months ago
  • Answered
Hello. I have a route table. All routes are directed to 10.106.0.1 as the default route, but I would like to route a single VLAN to another route. 
Could you please tell me about the things I need to do about the subject? Thank you.

Ori  Destination        Gateway         Mtr  Flags         VLAN       Duration
#s   Default Route      10.106.0.1      1    UG---S-um--f- vlan500    82d:15h:
39m:46s
#d   10.106.0.0/24      10.106.0.254    1    U------um--f- vlan500    82d:15h:
39m:48s
#d   10.106.1.0/24      10.106.1.1      1    U------um--f- vlan10     82d:15h:
39m:48s
#d   10.106.2.0/24      10.106.2.1      1    U------um--f- vlan20     82d:15h:
39m:49s
#d   10.106.3.0/24      10.106.3.1      1    U------um--f- vlan30     82d:15h:
39m:49s
Photo of Mustafa

Mustafa

  • 70 Points

Posted 9 months ago

  • 0
  • 1
Photo of Jarek

Jarek

  • 2,398 Points 2k badge 2x thumb
Hi,

all depends what switches you have and what you need to do.

For example you can use VR (Virtual Router) https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-a-Virtual-Router,
or you can use  flow-redirect https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-flow-redirect/?q=flow+red...
and so on...

--
Jarek