cancel
Showing results for 
Search instead for 
Did you mean: 

Purview Colector Wireless

Purview Colector Wireless

Luis_Mendes
Contributor
Purview colector doesn´t shows de comunication. But the servers receive the mirror of controller

75ed815a0464418585f255cba3190763_RackMultipart20151005-25010-9n33m7-COLECTOR_inline.jpg

12 REPLIES 12

Ronald_Dvorak
Honored Contributor
"My question is, which ip address do I need to configure at the controller in > VNS > Global > Netflow/Mirror N? 10.0.10.22 or 10.0.11.23?"

You need to configure the mgmt address = 10.0.10.22

aloeffle
Contributor
Dear all.

In my setup I receive NetFlow packets, but no application is detected. No Fingerprints do match for WiFi traffic.

My Purview is setup in Network profile 3
eth0 for MGMT
eth1 for mirrored traffic

eth0 10.0.10.22
eth1 /gre1 10.0.11.23

My question is, which ip address do I need to configure at the controller in > VNS > Global > Netflow/Mirror N? 10.0.10.22 or 10.0.11.23?

You need to know that we also have some S-Serie devices which use GRE to forward mirrored traffic to that PV-Engine.

BTW: Controller Management Traffic is mapped to esa0 as "AG ^^" mentioned.

Thanks and best regards
Alex

Ronald_Dvorak
Honored Contributor
You'd check whether there is any Netflow data from the controller to Purview.
I've got that from here... https://gtacknowledge.extremenetworks.com/articles/Q_A/Wants-somebody-to-review-his-Purview-config-t...
!!! The controller uses port 2095 instead of port 2055 !!!

So to check for Netflow data ssh to Purview.
Do a "ifconfig" to see the interfaces - I assume that you use eth0 for the 172.16.0.138 interface so the command is....

root@purview:/$ tcpdump -i eth0 udp port 2095
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
23:38:07.681163 IP 10.12.0.1.2095 > purview.wywlan.com.2095: UDP, length 84
23:38:16.045706 IP 10.12.0.1.2095 > purview.wywlan.com.2095: UDP, length 1450
23:38:16.780486 IP 10.12.0.1.2095 > purview.wywlan.com.2095: UDP, length 1450
23:38:17.194480 IP 10.12.0.1.2095 > purview.wywlan.com.2095: UDP, length 1450
^C

I've done the command and connected with my WLAN client and opened some webpages to get some Netflow data.

Also please doublecheck if you've configured it like this....
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Identifi-Wireless-Control...

GTM-P2G8KFN