cancel
Showing results for 
Search instead for 
Did you mean: 

purview: report how to show bidirectional traffic

purview: report how to show bidirectional traffic

Rainer_Adam
New Contributor III
Our customer has a mid-size Network with Enterasys components S8 in the Core.

PurView, NAC-GW's and Netsight are Version 6.1.0.182. ALL ports from the S8 are policy based mirrored to the PurView Gateway.

Following, simple request:

"Show me with which devices the D2 Switch with IP 10.255.255.150 talks SNMP"

If I start a "Report" with "Network Activity for a Client", set the Client IP Address to 10.255.255.150 I can see there 4 Applications SNMP, NTP, ICMP and TFTP.

If I here click to "SNMP" I will see ALL mirror SNMP traffic but NOT the Device I searched for... (there are about 100 Switches within that LAN).

What is the best way to fullfill this request?

7 REPLIES 7

Rainer_Adam
New Contributor III
YES, thanks again Mike for support.

It is very simple (if you know it 😉 ) Go to "Application" and there to "Application flows" on the right side you can see the "search" line. This is NOT simply a text field to search for, I REALLY recommend you to click to the help text and to "more" within there....

c27d9e97ff6c4456b442a68c8c0b5efc_RackMultipart20150616-9451-4uf7sm-helptext_inline.jpg


Mike_Thomas
Extreme Employee
Rainer and I resolved this in the case.

Rainer_Adam
New Contributor III
Extreme Networks GTAC Case # (01127878)
GTM-P2G8KFN